The TUDX milling head hosts interchangeable spindles, allowing machining materials from Inconel to composites on the same machine without needing to change the entire head.

The universal head offers low pivot positions, and with the bearings at 50° positioned axially to the tool in all directions, cutting forces align with the machining direction so feeds and speeds can be optimized. The head’s geometry allows it to extend beyond the machine’s travels, offering an additional 2ft of vertical working area. The 50° head also provides an additional 10° undercut angle to machine hard-to-reach surfaces otherwise requiring a separate setup.

Roughing carbon steel with a 4" face mill at 90hp and up to 650cm3/min of material removal (EMPT0855)

Machining aluminum with a 2" face mill at 24,000rpm removing up to 2,000cm3/min (EMPT2445)

Grinding (EMPT_GRIND)

Turning (EMPT_TURN)

Friction-stir-welding (EMPT_FSW)

The TUDX can be installed on FPT vertical gantry machines (Dinox, Dinomax, and Dinomek) and horizontal machines (Ronin, Castel Terus, and Verus).